Image module

To receive the uninterrupted wifi signals with same wifi throughout your house, the Netgear Extender Ex7500 is here to extend the wifi signals and help you with the same.

Manual of Netgear Ex7500 – You can buy the extenders from the range of different wifi extenders available at our website according to your choice and your need. The wifi extender comes with the manual having step by step instructions of how to setup and install the wifi extender. By following the easy and understandable steps you can setup the extender and start working within few minutes of the installation.

Netgear Ex7500 setup using WPS button

The wifi extender can be installed with simply using the WPS button. This can be done by following the given steps:

  • Turn on the wifi extender and place in the same room where the router is placed
  • Plug the extender in the electrical wall socket and wait for the power LED to glow green
  • On the extender and WPS router press the WPS button designed on them.
  • Once you have connected the extender and the wifi router the white LED light will glow indicating the connection built.
  • Move the extender to the new location. The new location should be halfway between the area of poor internet connection and the wifi router.
  • Connect your device and the PC to the extended wifi network.
  • Your extender will always use the same settings you have set on the wifi router. The bandwidth whether 2.4GHz and 5GHz will also be same as the bandwidth of the router.

I am text block. Click edit button to change this text. Lorem ipsum dolor sit amet, consectetur adipiscing elit. Ut elit tellus, luctus nec ullamcorper mattis, pulvinar dapibus leo.

Netgear Installation Assistant

You can also install the Netgear setup using the Netgear Installation Assistant by going through the following steps:

  • Turn on your extender and place it t the close proximity of the wifi router.
  • Plug in the extender in the electrical socket and wait for the power LED light to glow.
  • Press the power button of the extender if the LED light does not glow
  • With the help of wifi or the Ethernet connection connect the device or PC to the extender.
  • Wifi Connection – On the device go to the wifi settings and find and connect with the extender network. The extender will glow with the white LED light once the connection is established between the device and the extender.
  • Ethernet – You can connect multiple computers with the extender and for this all you need is a Ethernet cable for the connection. The Ethernet cable can be attached to the Ethernet port of the extender and the PC and your device can be connected to the extender.
  • Open the web page in the web browser like Google Chrome, Firefox, Internet Explorer etc and enter the website mywifiexttnet.net
  • On entering the website the Netgear assistant gets displayed on your screen with the series of prompts for your installation of wifi extender setup.
  • Place the wifi extender to a new location. The new location of the extender should be halfway between the spot of poor wifi signal and the wifi router. Once the well connection is established you will see the white light glowing on the power LED.
  • If the connection of the wifi signal is still weak then try keeping the extender a bit nearer to the wifi router till you see again the white blinking LED light.
  • Connect the devices like your PC and your smart phones to the wifi extender once you have find the perfect location from where you can receive strong signals for your devices.

In case of any issues or any queries you can always call to the team of experienced and skilled people at our customer care number mentioned on the website.

Configure FastLane Technology on Netgear Extender

Image module

You can achieve the strong wifi signals by the help of FastLane technology. It offers high speed wifi connection by the extender. The extender Ex7500 is a dual band extender supporting the fastlane technology and by these steps you can configure the fastlane technology on the extender.

  • With your wifi extender connect your device like PC or the smart phones
  • Go to the website mywifiexttnet.net by using any of the browsers like Google chrome, Microsoft edge etc. When the login window appears enter your correct username and password.
  • On the Netgear Genie Page two options i.e. ‘Do More’ and ‘FastLane’ will appear and click on them.
  • The two options will appear after this for selecting the bandwidths. The two options will be Device to extender in 2.4GHz only’ and extender to router in 5GHz only and the second one will be Device to extender in 5GHz and extender to router in 2.4GHz.
  • Select any of the two options and save the changes you made.

Common issues faced during the setup:

  • The website mywifiexttnet.net is not working or is slow.
  • You have entered incorrect detils of username or the password or you forgot your password
  • The wifi extender is not connected to the wifi
  • The wifi extender is not catching the wifi signals
  • The netgear genie app is not working
  • The Netgear genie app has successfully installed but not getting updated to the latest version.
  • The wifi extender is not working
  • There are issues with the wifi connectivity
  • There are filtering errors in the MAC address
  • The extender EX7500 has no internet
  • The extender EX7500 is not working on the current update installed
  • The connection on the wifi extender is not stable
  • You are not able to login to the extender EX7500
  • You are not able to put the Netgear EX7500 to the factory default settings and are not able to reset it.
  • The internet is connected but it is not working
  • You don’t remember the default password of the wifi extender
  • On the Netgear extender you cannot find the name of the network.
  • The Netgear genie setup page continues to appear even after you are done with the Netgear extender setup
  • The configuration of the CD is lost

Troubleshooting Netgear Ex7500 setup issues

To fix the setup issues you can go through the following steps

  • Make sure the extender is not connected to faulty electrical socket
  • Make sure the extender is receiving proper electrical supply
  • There is high speed un-interrupted wifi connection available
  • Do not use any kind of damaged cables
  • For the high internet connectivity make sure the router and the extender are placed at the place away from wall corners and pillars and also the sources like fish tank, Bluetooth speakers which can interrupt the wifi signals.
  • Check once if you entered the correct URL while logging on the website and also have entered the correct details of your account like login id and password
  • For the best connection use the latest version of web browser and the latest version of firmware and keep your extender always updated
  • In case of any problems you are still facing reset your extender to the factory default settings

Troubleshooting Netgear EX7500 Setup Issues

Image module

To fix the setup issues you can go through the following steps

  • Make sure the extender is not connected to faulty electrical socket
  • Make sure the extender is receiving proper electrical supply
  • There is high speed un-interrupted wifi connection available
  • Do not use any kind of damaged cables
  • For the high internet connectivity make sure the router and the extender are placed at the place away from wall corners and pillars and also the sources like fish tank, Bluetooth speakers which can interrupt the wifi signals.
  • Check once if you entered the correct URL while logging on the website and also have entered the correct details of your account like login id and password
  • For the best connection use the latest version of web browser and the latest version of firmware and keep your extender always updated
  • In case of any problems you are still facing reset your extender to the factory default settings

Update Firmware on Netgear Extender

Always make sure that you are using the latest version of the firmware for having the successful high speed internet throughout from your extender. Update the wifi extender with Netgear Extender firmware. It is a firmware with set of instructions manuals which is integrated on your hardware device. The firmware is a operating system which runs on particular model of particular make. The following few steps will help you to upgrade the firmware.

  • Turn on the wifi extender and connect the extender’s network to your device i.e. phone or the PC.
  • Open the web browser and enter to the website www.mywifiexttnet.net .
  • On the extender enter the login details i.e. your username and your password.
  • Go to the settings menu and click on the option of Firmware Upgrade and click on the check button
  • Click on the yes button if there is any new version available and wait for few minutes for the upgrade of the extender to happen

If you still face any kind of problems or have queries regarding setup or the update you can always call on the customer support executive number and the team of skilled people will clear all your issues and help you with the setup and the upgrade.